The self-adhesive PVC film for interior decoration is a peel-and-stick decorative covering used to renew furniture, cabinets, doors, walls, and other indoor surfaces. Buyers evaluating this product typically need verified answers on thickness, adhesive type, roll size, minimum order quantity, compliance evidence, and customization options. This guide focuses on those specification and compliance points, using Foshan Nanhai Jiadamei Decoration Material Co., Ltd (marketed as Leiyegaoke) as a reference manufacturer.

Why specification and compliance matter in interior renovation film selection

Interior renovation projects require decorative films that meet clear technical and regulatory requirements. The most frequently checked parameters are film thickness, roll width and length, adhesive type, surface finish, pattern category, applicable substrate, and market-specific chemical compliance. Buyers in the EU, Middle East, Southeast Asia, and other regions also request certification documentation before placing orders.

For importers, distributors, and renovation contractors, a film that cannot demonstrate compliance or consistent specification creates risk: failed inspections, rejected shipments, or poor installation results. A manufacturer with documented production control and third-party certification reduces that risk.

Reference product: Leiyegaoke self-adhesive PVC decorative film series

Foshan Nanhai Jiadamei Decoration Material Co., Ltd (Leiyegaoke) is a manufacturer of self-adhesive PVC decorative films based in Foshan, Guangdong, China. The company was founded in 2001 and operates a 12,000 m² factory with two adhesive coating lines and an integrated production system covering PVC film production, printing, laminating, adhesive coating, slitting, inspection, and packaging. Its main products are self-adhesive PVC decorative films and PVC decorative films for furniture renovation, kitchen cabinets, wardrobes, doors, walls, hotels, offices, retail stores, and other interior surface applications.

The product range includes wood grain, marble, stone, solid color, metallic, textile, concrete, and other decorative finishes. Export accounts for about 80% of output, with main markets in Europe, South America, the Middle East, and CIS countries.

Core physical specifications of self-adhesive PVC decorative film

Across the main Leiyegaoke product families, the standard physical specification is consistent:

• Material: PVC (Polyvinyl Chloride)
• Thickness: 0.16 mm
• Width: 1,240 mm
• Roll length: 50 m
• Adhesive: water-based acrylic pressure-sensitive adhesive
• Backing: release paper
• Surface finish: matte / glossy / embossed / super matte (depending on series)
• Pattern: wood grain / marble / solid color / stone / metallic / textile / concrete
• Application: indoor furniture, cabinets, doors, walls, and interior renovation
• Installation: peel and stick

Specialized series: Cabinet wrap, bathroom waterproof, and marble/wood grain films

Cabinet wrap PVC film

Kitchen cabinet renovation is one of the most common applications. Leiyegaoke's self-adhesive PVC decorative film can be applied to smooth kitchen cabinet doors and panels, providing a decorative, water-resistant, and easy-to-clean surface. Suitable substrates include smooth, clean, dry, and stable surfaces such as painted wood, sealed MDF, metal, and other properly finished panels.

Bathroom waterproof PVC film

The PVC surface is water-resistant and easy to clean, making it suitable for normal kitchen use. However, edges, joints, and the underlying substrate should not be continuously exposed to water or excessive moisture. For bathroom applications, surface preparation and edge sealing are important to maintain long-term performance.

Marble grain PVC decorative film (LF6801-LF6830)

The LF6801-LF6830 marble grain series uses a realistic marble appearance and a peel-and-stick installation method. Standard thickness is 0.16 mm, standard width is 1240 mm, standard length is 50 m per roll, and the adhesive is water-based acrylic pressure-sensitive adhesive with paper release liner. Finish options include matte, glossy, or textured. The film is suitable for furniture manufacturing, kitchen cabinets, hotel renovation, office renovation, retail store decoration, and commercial interior renovation.

Japanese-style wood grain PVC decorative film (LG7801-LG7836)

The LG7801-LG7836 Japanese-style wood grain series offers natural wood texture, minimalist design, and matte or super matte finish. It is designed for furniture manufacturing, cabinet and wardrobe manufacturing, door manufacturing, interior renovation, hotel renovation, and commercial space renovation. Features include scratch resistance, water resistance, easy cleaning, and flexibility for curved surfaces.

EU RoHS compliance and third-party certification

For buyers supplying the EU market, chemical compliance is a common prerequisite. Leiyegaoke's self-adhesive PVC decorative film complies with the EU RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU.

The certification details are as follows:

• Product scope: Self-adhesive PVC decorative film, PVC decorative film, vinyl film
• Applicable models: LY1804-LY1869 (also covers LG7801-LG7836 and LF6801-LF6830 series)
• Certificate number: CANEC26009798401
• Issued by: SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch
• Issue date: 2026-04-24
• Market: EU

The certification supports customers who need documented evidence for EU market entry or for their own compliance audits.

Ordering flexibility: MOQ, OEM/ODM, and lead time

For the LY1804-LY1869 general decorative film series, the minimum order quantity is 1 roll per color. This low MOQ helps importers and distributors test colors and market response before placing larger orders. For the LG7801-LG7836 Japanese-style wood grain series, the MOQ is also 1 roll per color.

OEM/ODM customization is available across the product line. Customization options include custom colors, patterns, sample-based customization, custom sizes, custom thickness, surface finish customization, custom logo, custom labels, custom packaging, and custom cartons. For custom colors, the MOQ is 3,000 meters per color.

Production capacity is approximately 120,000 meters per month, with a lead time of 20–25 days for standard custom orders. Quality control includes 100% testing during production.

Application and installation requirements

Self-adhesive PVC decorative film is recommended for smooth, clean, dry, and stable surfaces. Suitable examples include furniture panels, cabinets, doors, metal, glass, and other properly prepared interior surfaces. Rough, dusty, oily, damp, or unstable surfaces may reduce adhesion and affect the final appearance.

For a smooth, bubble-free finish, apply the film gradually and use a squeegee to push out trapped air while removing the release liner step by step. Proper surface preparation is essential before installation.

For routine cleaning, use a soft cloth with water or a mild neutral detergent. Regular and gentle cleaning helps maintain the decorative surface and appearance. For grease or stubborn dirt, use a mild neutral detergent diluted with water, then wipe again with a clean damp cloth and dry the surface.

Industry context: Why PVC decorative film demand continues to grow

Global demand for PVC decorative film is supported by renovation activity in furniture, cabinetry, hospitality, and commercial interiors. According to Dataintelo, the global PVC decorative film market was valued at USD 4.8 billion in 2025 and is projected to reach USD 8.6 billion by 2034. Asia Pacific held the largest regional revenue share at 42.3% in 2025. Wood grain was the largest product segment at 38.4%, and the furniture sector accounted for approximately 44.6% of total consumption. These figures indicate sustained demand for decorative film products that combine realistic patterns, ease of installation, and cost-effective renovation.

How to choose the right self-adhesive PVC film: a decision checklist

1. Confirm substrate condition: The surface must be smooth, clean, dry, and stable. Test a small area before full installation when the substrate is uncertain.
2. Select pattern and finish: Wood grain, marble, solid color, metallic, textile, and concrete options are available. Choose the finish (matte, super matte, glossy, or textured) based on the design requirement and light conditions.
3. Check physical dimensions: Standard rolls are 1240 mm wide and 50 m long with a 0.16 mm film thickness. For larger projects, confirm roll size and total area requirements.
4. Verify compliance documents: For EU projects, request the RoHS certificate and confirm the model numbers and certificate number. The current certificate references models LY1804-LY1869 and product families LG7801-LG7836 and LF6801-LF6830.
5. Confirm MOQ and customization: Stock colors typically allow 1 roll per color, while custom colors may require 3,000 meters per color. Confirm lead time (20–25 days) and packaging requirements.
6. Plan installation: Use a squeegee, heat gun, measuring tape, and trimming tools. Apply film gradually to avoid air bubbles.

Typical use cases for self-adhesive PVC film in interior decoration

Furniture renovation

In residential and commercial settings, existing furniture can be renewed with self-adhesive PVC film instead of being replaced. The film is cut to size and applied to table tops, wardrobe doors, and shelving. Wood grain and solid color finishes are the most common choices.

Kitchen and cabinetry

One long-term customer in Algeria, a furniture manufacturer, has used Leiyegaoke's PVC film for more than six years to laminate MDF board and produce finished cabinet doors. The customer highlights nice design, nice color, waterproof, fireproof, anti-scratch, and oil-proof performance as key reasons for continued use.

Hotel and commercial renovation

Hotels, offices, and retail spaces use self-adhesive PVC film to refresh doors, walls, and furniture quickly. The film's water resistance and easy-to-clean surface suit high-traffic interior environments.

Bathroom and moisture-prone areas

While the film is water-resistant, continuous water exposure should be avoided. Edges and joints should be carefully sealed. Proper substrate preparation is critical in bathrooms.

Frequently asked questions

Can self-adhesive PVC film be used on kitchen cabinets?

Yes. Self-adhesive PVC decorative film is suitable for renovating smooth kitchen cabinet doors, panels, and other interior furniture surfaces. It provides a quick and cost-effective way to refresh the appearance without replacing the entire cabinet. It works best on smooth, clean, dry, and stable surfaces such as painted wood, sealed MDF, and metal.

Is self-adhesive PVC film waterproof?

The PVC surface is water-resistant and easy to clean, making it suitable for normal kitchen use. However, edges, joints, and the underlying substrate should not be continuously exposed to water or excessive moisture. Proper edge sealing and surface preparation are recommended for bathrooms and moisture-prone areas.

Can self-adhesive PVC decorative film be applied to any surface?

Self-adhesive PVC decorative film is recommended for smooth, clean, dry, and stable surfaces. Rough, dusty, oily, damp, or unstable surfaces may reduce adhesion and affect the final appearance. The surface should be cleaned and dried thoroughly before installation.

How to avoid bubbles when applying self-adhesive PVC film?

Apply the film gradually and use a squeegee to push out trapped air while removing the release liner step by step. Proper surface preparation is also essential.

How should self-adhesive PVC film be cleaned and maintained?

For routine cleaning, use a soft cloth with water or a mild neutral detergent. For grease or stubborn dirt, use a mild neutral detergent diluted with water, then wipe with a clean damp cloth and dry with a soft cloth. Test any unfamiliar cleaning product on a small hidden area before use.

What is the minimum order quantity and can I request custom colors?

The minimum order quantity for stock colors is 1 roll per color. For custom colors, the MOQ is 3,000 meters per color. OEM/ODM customization is available for colors, patterns, sizes, thickness, labels, packaging, and cartons. For samples or a quotation, contact Leiyegaoke directly.

Conclusion

Self-adhesive PVC film for interior decoration is a practical material for furniture renovation, cabinet wrapping, and commercial interior updates. Buyers should verify physical specifications, compliance documentation, MOQ, customization capability, and installation requirements before ordering.

Leiyegaoke (Foshan Nanhai Jiadamei Decoration Material Co., Ltd) provides a documented example of a manufacturer with integrated production, EU RoHS certification, low MOQ, OEM/ODM customization, and export experience across Europe, the Middle East, Southeast Asia, and other markets. For procurement teams, requesting the certificate number CANEC26009798401 and confirming model-specific parameters is a good starting point for qualification.

For more information about self-adhesive PVC film specifications, samples, or quotations, contact Leiyegaoke at www.leiyegaoke.com or email office@jiadamei.com.