Self-Adhesive PVC Film for Interior Decoration: Hotel and Retail Renovation Application Guide
Cover: wood grain self-adhesive PVC decorative film used for interior surface renovation in hospitality and retail interiors.
Self-adhesive PVC film for interior decoration is a peel-and-stick surface finish: a PVC face film coated with a pressure-sensitive adhesive and protected by a release liner, applied directly onto existing doors, cabinet and wardrobe fronts, counters, wall panels and fixtures. In hotel and retail renovation it changes the appearance of a space without removing the substrate, which keeps guest rooms and sales floors out of service for days instead of weeks.
The film specified in this guide is supplied by leiyegaoke (Foshan Nanhai Jiadamei Decoration Material Co., Ltd), a manufacturer of self-adhesive PVC decorative films based in Foshan, Guangdong, China, founded in 2001. Standard supply is 0.16 mm thick, 1240 mm wide and 50 m long per roll, with a water-based acrylic pressure-sensitive adhesive and a paper release liner. Japanese-style wood grain models run from LG7801 to LG7836; marble grain models run from LF6801 to LF6830.
This guide is written for the people who have to make that specification hold on site: project specifiers, hotel engineering and refurbishment teams, retail fit-out contractors, and importers supplying renovation materials. It covers which surfaces accept the film, how wood grain and marble grain ranges are assigned by area, how large-surface peel-and-stick installation is sequenced, and which compliance, MOQ and lead-time constraints must be settled before the first roll is ordered.
Direct answer: in hotel and retail projects, self-adhesive PVC decorative film is applied to smooth, clean, dry and stable indoor substrates such as door faces, wardrobe and cabinet fronts, counters, wall panels, lift interiors and retail fixtures. Standard rolls are 0.16 mm × 1240 mm × 50 m with a water-based acrylic adhesive and paper release liner; stock colours have an MOQ of 1 roll per colour, while custom colours have an MOQ of 3,000 meters per colour.
The Renovation Problem: Why Hotels and Retailers Look for a Surface Finish
Hotel and retail renovation share a constraint that residential work rarely has: the space has to earn while it is being changed. A guest floor out of inventory, or a sales floor closed for a fixture rebuild, is direct revenue loss. The question in these projects is therefore rarely whether a substrate can be reused, but whether reusing it can still meet the design standard.
Hotel refurbishment constraints
Hotel refurbishment runs in phases. Rooms are released in blocks, corridors are worked at night, and the design language repeats: the same door face, wardrobe front and vanity finish appears in every room, sometimes across a brand portfolio. Three constraints follow. Colour and pattern consistency matters more than novelty, because a batch that reads slightly warmer than the approved mock-up is visible when identical doors are viewed side by side in one corridor. The installation has to be clean, and a film with a paper release liner needs no additional glue, so there is no wet trade, no mixing and no open-pot odour on an occupied floor. High-touch elements — door leading edges, handle surrounds, lift interiors and corridor panels — carry most of the wear, so edge detailing and surface durability decide how the refurbishment looks two years later.
Retail fit-out constraints
Retail programmes compress the same problem into shorter windows. Installations are scheduled overnight or between trading seasons, fixture carcasses are frequently sound while their appearance is dated, and brand standards require the same finish to be reproduced store by store. Refacing an existing fixture with film preserves the carcass and its fixings, and a peel-and-stick application can be completed inside a single closed period.
Where the constraint actually bites
- Substrate acceptance. Rough, dusty, oily, damp or unstable surfaces reduce adhesion and affect the final appearance.
- Large-surface technique. Bubbles and wrinkles are an application issue before they are a product issue; sequencing and squeegee discipline decide the result on perimeter walls and long counters.
- Edges and joints. Edge lifting starts where trimming is incomplete or where a joint sits in a wet or high-friction zone.
- Documentation. Chain specifications and import clearance ask for compliance paperwork and a tariff classification before the purchase order is raised.
- Order planning. Stock colours and custom colours carry different minimum quantities, and each finish label is ordered separately.
Industry Background: Interior Decorative Film as a Renovation Category
Decorative PVC film is an established category rather than an emerging one. Dataintelo, in its PVC Decorative Film Market Research Report 2034, values the global PVC decorative film market at USD 4.8 billion in 2025 and projects USD 8.6 billion by 2034. The same report places wood grain as the largest product segment at 38.4% share in 2025, and estimates that the furniture sector accounts for approximately 44.6% of global PVC decorative film consumption in 2025.
Supply has shifted accordingly. International Trader Publications reports that China became the world's largest PVC exporter in 2025, accounting for 24% of total global trade volume. For specifiers, the practical consequence of a mature, wood-grain-led category is that roll formats, finish ranges and certification documents are widely standardised — selection decisions turn on substrate suitability, finish consistency, documentation and delivery rather than on the existence of the product itself.
The Specification: What the Film Consists Of and What It Allows
Construction and roll format
The film is a PVC face film with a water-based acrylic pressure-sensitive adhesive and a paper release liner, installed peel-and-stick with no additional glue required. Standard thickness is 0.16 mm, standard roll width is 1240 mm and standard roll length is 50 m; thickness, width and roll length are customizable on order, and custom widths are available.
The 1240 mm width is the working dimension that matters in a renovation: it covers the height of a standard cabinet door or wardrobe front in one pass, which removes a horizontal joint from the most visible surfaces. A roll of 1240 mm × 50 m covers approximately 62 m² (calculated from the stated roll dimensions). Film is packed 1 roll per carton and classified under HS code 39199090.
Japanese-style wood grain: LG7801-LG7836
The LG series is a Japanese-style wood grain self-adhesive PVC decorative film in 0.16 mm thickness and 1240 mm × 50 m rolls, with matte or super matte finish, water-based acrylic adhesive and paper release liner, for interior decoration and renovation. The range is described by the manufacturer as offering a natural Japanese-style wood grain and realistic wood texture with a minimalist design, described as scratch resistant, waterproof, easy to clean, self-adhesive with strong adhesion, flexible for curved surfaces, and suitable for cost-effective renovation, with OEM/ODM customization available.

Marble grain PVC decorative film from the LF6801-LF6830 range, used for counters, vanities and display surfaces.
Marble grain: LF6801-LF6830
The LF series is a marble grain self-adhesive decorative film with a marble effect design, standard thickness 0.16 mm, standard width 1240 mm and 50 m per roll, water-based acrylic pressure-sensitive adhesive and paper release liner. Surface finish is matte, glossy or textured at option, and adhesive strength can be customized according to the application. The range is described as delivering a realistic marble appearance with peel-and-stick installation, no additional glue, a waterproof surface, easy cleaning and maintenance, good adhesion, flexibility for cutting, and suitability for large-surface application as a cost-effective alternative to real marble, with OEM colours, patterns, sizes and packaging available.
Other series in the same format
Two further ranges share the same 0.16 mm × 1240 mm × 50 m format. The LI9801-LI9836 wood grain range offers wood grain, matte and embossed surfaces for furniture, cabinets, doors and interior renovation. The LY1804-LY1869 range covers wood grain, marble, solid color, stone, metallic, textile and concrete patterns with matte, glossy, embossed or super matte finishes, for furniture, cabinets, doors, walls and interior renovation.
Super matte solid color PVC decorative film, an option where reflection and glare have to be controlled on large panels.
Finish choice: matte, super matte, glossy and textured
- Matte and super matte. Available in the LG wood grain range and in the LY range. Low-reflection surfaces suit minimalist hotel interiors and long wall panels where glare and fingermarks would be conspicuous.
- Glossy. Available in the LF marble range. Used where a polished, reflective stone effect is intended, typically on counters and display surfaces rather than on large vertical panels.
- Textured and embossed. Available across the LF, LI and LY ranges. A textured surface gives tactile depth to wall panels and door faces and helps break up the visual flatness of large uninterrupted areas.
- Scratch-resistant surfaces. The LG range is described as scratch resistant, which is relevant for door faces, corridor panels and retail fixture fronts that are handled daily.
Step-by-Step: Applying Film Across a Hotel or Retail Project
Step 1 — Convert the design intent into a surface schedule
List every surface by location and substrate: guest room doors, wardrobe fronts, minibar cabinets, corridor panels, lift doors, reception counters, retail perimeter fixtures, cash counters and fitting-room partitions. The schedule decides roll quantities, finish splits and installation sequence, and it is the document that prevents the wrong pattern being ordered for the wrong area.
Step 2 — Survey and accept each substrate
Film is recommended for smooth, clean, dry and stable surfaces such as furniture panels, cabinets, doors, metal, glass and other properly prepared interior surfaces. Rough, dusty, oily, damp or unstable surfaces must be cleaned, dried and, where necessary, treated before installation. On any uncertain substrate, install a test patch on a small hidden area first.
Step 3 — Approve the finish on a mock-up
Install a sample on one representative door or panel and check pattern direction, seam position and colour under the actual site lighting before production quantities are committed. Sample-based customization is available, and each stock colour can be ordered from 1 roll, so a mock-up does not require a bulk commitment.
Step 4 — Plan rolls by area
Divide the total surface area by roughly 62 m² per roll, then add length for pattern alignment, edge trimming and cut-outs around handles, hinges and sockets. Areas that will be installed in different phases should be ordered together so that the batch is consistent across the programme.
Step 5 — Sequence the installation by elevation
Work top to bottom on each elevation. Unroll and remove the liner progressively rather than stripping a full panel, and squeegee from the centre outward so that air is pushed ahead of the adhesive instead of being trapped. Keep the film under light tension but do not stretch it; cut at panel lines wherever possible so that joints fall on a natural break in the elevation.
Step 6 — Detail edges, corners and cut-outs
Re-trim edges with a sharp blade against a straight edge, then warm the edge with a heat gun and press it down. On curved surfaces, gentle heat helps the film conform — the LG range is described as flexible for curved surfaces. Cut-outs around hardware should be trimmed slightly inside the fitting so the edge is covered by the hardware rather than left exposed.
Step 7 — Protect high-touch and moisture-adjacent zones
Door leading edges, handle surrounds, corridor corners, vanity fronts and counter nosings take the wear. Confirm that edges are fully adhered and that joints are not positioned in continuously wet areas: the PVC surface is waterproof and easy to clean, but edges, joints and the underlying substrate should not be permanently exposed to water or excessive moisture.
Step 8 — Clean, inspect and hand over
Inspect under raking light for bubbles, wrinkles and lifted edges, then clean with a soft cloth and water or a mild neutral detergent. Hand the cleaning instruction to the facility team, because abrasive pads and aggressive solvents are the most common cause of surface damage after a successful installation.
Tools used in the application: utility knife, squeegee, heat gun, measuring tape, ruler, application roller, surface cleaning tools and edge trimming tools.
Hotel and Retail Use Cases
| Environment | Typical surfaces | Suitable finish direction | Practical note |
|---|---|---|---|
| Hotel guest room | Wardrobe fronts, entry doors, minibar cabinets, vanity units | Japanese-style wood grain LG7801-LG7836 in matte or super matte | One batch across all rooms; door edges take the highest wear |
| Hotel public areas | Corridor panels, lift doors and interiors, reception and concierge counters | Wood grain for panels, marble grain LF6801-LF6830 for counters | Large panels need consistent pattern alignment across joints |
| Hotel F&B and back-of-house | Cabinet fronts, service counters, staff doors | Wood grain or solid color, matte or embossed | Oil and grease wipe off a waterproof surface with mild detergent |
| Retail sales floor | Perimeter fixture wraps, display plinths, cash counters, fitting-room partitions | Marble grain (glossy or textured) for counters, solid color for fixtures | Fixture carcasses are reused; surface preparation decides adhesion |
| Retail back-of-house | Storage shelving, stockroom doors, office partitions | Any stock pattern, matte finish | Install outside trading hours; stock colours ship from 1 roll |

Wood grain PVC film applied to a table top — the same peel-and-stick method used on counters, plinths and fixture tops.
Finish and Series Comparison
The four ranges share one roll format, so the selection decision is about pattern, finish and application, not about dimensions.
| Series / models | Pattern | Surface options | Typical hotel and retail use | MOQ |
|---|---|---|---|---|
| LG7801-LG7836 | Japanese-style wood grain | Matte, super matte | Guest room doors, wardrobes, corridor and lift panels | 1 roll per colour (stock) |
| LF6801-LF6830 | Marble grain | Matte, glossy, textured | Reception counters, vanities, display plinths, cash counters | 1 roll per colour (stock) |
| LI9801-LI9836 | Wood grain | Wood grain, matte, embossed | Cabinets, doors, furniture and fixture fronts | 1 roll per colour (stock) |
| LY1804-LY1869 | Wood grain, marble, solid color, stone, metallic, textile, concrete | Matte, glossy, embossed, super matte | Mixed schedules where several surfaces need one visual language | 1 roll per colour (stock) |
MOQ applies per colour. Custom colours are 3,000 meters per colour.
Standard Specification at a Glance
| Parameter | Value |
|---|---|
| Material | PVC |
| Standard thickness | 0.16 mm (customizable) |
| Standard roll width | 1240 mm (custom widths available) |
| Standard roll length | 50 m (customizable) |
| Adhesive | Water-based acrylic pressure-sensitive adhesive |
| Release liner | Paper release liner |
| Installation | Peel and stick; no additional glue required |
| Surface finishes | Matte, super matte, glossy, embossed, textured |
| Patterns | Wood grain, marble, solid color, stone, metallic, textile, concrete |
| Application | Indoor decorative surface renovation |
| MOQ | 1 roll per colour (stock colours); 3,000 meters per colour (custom colours) |
| Packing | 1 roll per carton |
| HS code | 39199090 |
| Certification | REACH SVHC Test Report CANEC26026322901; EU RoHS certificate CANEC26009798401 |
| Lead time | 20-25 days |
| Monthly capacity | 120,000 meters |
Substrate Acceptance Matrix
| Substrate condition | Examples | Action before installation |
|---|---|---|
| Accepted | Painted or sealed wood panels, sealed MDF, laminate-faced boards, metal, glass, smooth stable furniture surfaces | Clean, degrease and dry; install directly with squeegee pressure |
| Needs preparation | Rough, porous or previously repaired surfaces | Sand or fill, remove dust, apply surface treatment or primer where required, then test a small area |
| Not recommended | Dusty, oily, damp or unstable substrates; surfaces with loose coating | Correct the substrate first; adhesion and final appearance are otherwise compromised |
Ordering Constraints: MOQ, Customization, Lead Time and Capacity
leiyegaoke (Foshan Nanhai Jiadamei Decoration Material Co., Ltd) is a self-adhesive PVC decorative film manufacturer based in Foshan, Guangdong, China, founded in 2001, operating a 12,000 m² factory with two adhesive coating lines and an integrated production system covering film production, printing, laminating, adhesive coating, slitting, inspection and packing, supported by an R&D team of 5 engineers and around 80% export share.
- MOQ. Stock colours: 1 roll per colour. Custom colours: 3,000 meters per colour.
- Customization. OEM/ODM customization is available for colours, patterns, sizes and packaging. The customization scope also includes sample-based customization, custom thickness, surface finish customization, custom logo, labels, cartons and private-label packaging. Thickness, width and roll length are customizable on order.
- Lead time and capacity. Standard lead time is 20-25 days against a monthly capacity of 120,000 meters, with 100% testing.
- Supply record. A furniture manufacturer customer in Algeria has specified PVC decorative film at around 100,000 meters per month for more than six years, applying it as a laminate on MDF board for finished cabinet doors.
Planning rule: in a hotel or retail programme, release the stock-colour quantities first so installation can begin while custom colours are in production. Each finish label — wood grain and marble grain, matte and glossy — is a separate colour for MOQ purposes.
Compliance Documentation for Hotel and Retail Specifiers
Two third-party documents are held for the film and are the ones normally requested at tender stage.
- REACH SVHC Test Report, number CANEC26026322901. Issued by SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch, covering 253 SVHC screening under Regulation (EC) No. 1907/2006 (REACH), applicable to the EU market.
- EU RoHS certificate, number CANEC26009798401. Issued by SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch under Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU, applicable to the EU market, and covering models LY1804-LY1869.
- Tariff classification. HS code 39199090.

REACH SVHC Test Report CANEC26026322901, issued by SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch, covering 253 SVHC screening.
Where a project specification adds requirements beyond chemical compliance — flame-retardant performance, for example, is referenced in the PVC decorative film category through grades such as B1 (GB 8624) — confirm the available documentation with the supplier at tender stage rather than assuming it is covered by the REACH and RoHS reports.
Maintenance, Cleaning and Performance Limits
Routine cleaning is water and a soft cloth. Remove loose dust with a soft dry cloth, wipe normal stains with a soft damp cloth, use a mild neutral detergent diluted with water for grease or stubborn dirt, wipe again with a clean damp cloth to remove residue, then dry with a soft cloth. Test any unfamiliar cleaning product on a small hidden area before use.
The limits matter as much as the performance. The film is an indoor decorative surface finish, not a structural material: it follows the condition of the substrate underneath, it is intended for smooth, clean, dry and stable surfaces, and its edges and joints should not be continuously exposed to water or excessive moisture. In wet-zone applications, the detailing of edges and the choice of adjacent materials decide long-term performance.
FAQ
Which compliance documents are available for a hotel or retail tender?
Two third-party documents are held for the film: a REACH SVHC Test Report (number CANEC26026322901) issued by SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch, covering 253 SVHC screening under Regulation (EC) No. 1907/2006 and applicable to the EU market; and an EU RoHS certificate (number CANEC26009798401) issued by the same body under Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. The product is classified under HS code 39199090. Where a specification calls for additional performance documentation, such as flame-retardant grades, confirm the requirement at tender stage.
Can the film be produced to a chain's own colour, pattern, size and packaging?
Yes. OEM/ODM customization is available for colours, patterns, sizes and packaging, and the customization scope also includes sample-based customization, custom thickness, surface finish customization, custom logo, labels, cartons and private-label packaging. Thickness, width and roll length are customizable on order, and custom widths are available. Custom colours carry an MOQ of 3,000 meters per colour, while stock colours can be ordered from 1 roll per colour.
What is the minimum order quantity, and how many rolls does a project need?
The MOQ is 1 roll per colour for stock colours. Each roll is 0.16 mm × 1240 mm × 50 m and covers approximately 62 m², so a project roll count follows from the surface schedule: total area divided by 62 m², plus additional length for pattern alignment, edge trimming and cut-outs. Film ships 1 roll per carton. Because MOQ applies per colour, wood grain and marble grain areas, and matte and glossy variants, are planned as separate lines.
Can we validate the finish before committing to production?
Yes. Sample-based customization is part of the OEM/ODM scope, and the 1-roll-per-colour MOQ allows a small trial order. Install the sample on a representative substrate and check adhesion, pattern direction and appearance under the actual project lighting; on an uncertain substrate, test a small hidden area first. Rough, dusty, oily, damp or unstable surfaces must be prepared before a full installation.
What lead time and capacity should the project schedule assume?
Standard lead time is 20-25 days against a monthly capacity of 120,000 meters, with 100% testing and an integrated process from film production and printing through lamination, adhesive coating, slitting, inspection and packing. For phased hotel or retail programmes, place stock-colour quantities first so installation can start while custom colours are in production. To plan a specific project, send the surface schedule and finish references to leiyegaoke at office@jiadamei.com or +86 13420779866 (WhatsApp), or request a sample and quotation through www.leiyegaoke.com.
Conclusion: Sequencing the Decisions, Not Just the Surfaces
A hotel or retail renovation succeeds with self-adhesive PVC decorative film when four decisions are made in order. First, accept the substrate: smooth, clean, dry and stable, or prepared until it is. Second, assign the finish by area — Japanese-style wood grain LG7801-LG7836 in matte or super matte for doors, wardrobes, corridor and lift panels; marble grain LF6801-LF6830 in matte, glossy or textured for counters, vanities and display surfaces. Third, plan rolls against the 0.16 mm × 1240 mm × 50 m format and the 1-roll-per-colour MOQ, and separate stock-colour releases from custom-colour production. Fourth, close the documentation before tender: REACH SVHC Test Report CANEC26026322901, EU RoHS certificate CANEC26009798401 and HS code 39199090.
Handled in that order, the film converts a disruptive refurbishment into a scheduled surface programme — with clean installation, consistent finish across repeated rooms and stores, and a maintenance routine that keeps the result intact.

OEM/ODM packaging: custom labels, cartons and private-label packaging are available for project and distribution orders.
Plan a hotel or retail programme with leiyegaoke
Send your surface schedule, finish references and target installation dates. leiyegaoke (Foshan Nanhai Jiadamei Decoration Material Co., Ltd) supplies self-adhesive PVC decorative film in 0.16 mm × 1240 mm × 50 m rolls, with stock colours from 1 roll per colour, custom colours from 3,000 meters per colour, and OEM/ODM options for colour, pattern, size and packaging.
Email: office@jiadamei.com | Tel / WhatsApp: +86 13420779866 | Website: www.leiyegaoke.com
Address: Jinguang Industrial Zone, Tangtou Village, Shishan Town, Nanhai District, Foshan City, Guangdong Province, China
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.
