Leiyegaoke (Foshan Nanhai Jiadamei Decoration Material Co., Ltd) manufactures three self-adhesive PVC decorative film series for interior renovation work. Ranked by renovation fit, the order is 1) LF6801–LF6830 marble grain, 2) LG7801–LG7836 Japanese-style wood grain, and 3) LY1804–LY1869 multi-pattern. The ranking measures how each series performs on the surfaces most often renovated — kitchen cabinets, wardrobe fronts, interior doors, furniture panels and wall surfaces — not overall product quality, because all three series are built on the same base construction.

That shared base is a 0.16 mm PVC film in 1,240 mm width and 50 m roll length, coated with a water-based acrylic pressure-sensitive adhesive over a paper release liner, installed peel-and-stick, and available in matte, glossy and textured finishes. Minimum order quantity is one roll per colour for stock colours, and OEM/ODM customisation is available.

Why the “Which Series?” Question Is Harder Than It Looks

Most renovation buyers pick a self-adhesive PVC film from a photograph and only meet the real constraints later. A film has to cover a specific substrate, over a specific area, with a specific finish expectation, in a specific room. Substrate, area, finish and environment decide which series fits — and none of those four variables is visible in a product image.

Three failure patterns repeat across interior renovation projects:

• Pattern scale versus area. A small-repeat pattern laid over a large continuous panel reads as tiled rather than seamless, which is the opposite of what a stone-look or wood-look surface is meant to achieve.
• Finish versus substrate flatness. A high-gloss finish reflects light and reveals substrate imperfections on large flat panels, while matte and super matte finishes absorb light and visually suppress them.
• Adhesion versus surface preparation. Self-adhesive PVC decorative film is recommended for smooth, clean, dry and stable surfaces. Rough, dusty, oily, damp or unstable surfaces may reduce adhesion and cause bubbling, edge lifting, peeling or an uneven surface appearance.

The practical question is therefore not “which film looks best in a catalogue” but “which series is built for the surfaces this project actually has”. That is the question this ranking answers.

Industry Background: Why Decorative Film Ranks as a Renovation Material

Decorative PVC film is no longer a niche patch material. According to Dataintelo’s PVC Decorative Film Market Research Report 2034, the global PVC decorative film market was valued at USD 4.8 billion in 2025 and is projected to reach USD 8.6 billion by 2034, with the source reporting a 6.7% CAGR over that period. Within that market, wood grain held the largest product segment share at 38.4% in 2025, and the furniture sector accounted for approximately 44.6% of total global consumption in the same year. Asia Pacific dominated with a 42.3% revenue share in 2025 (Dataintelo).

Supply also concentrates in the region. China became the world’s largest PVC exporter in 2025, accounting for 24% of total global trade volume (International Trader Publications, 2026). For a renovator or importer, the practical implication is straightforward: the film category is large, the wood grain sub-segment is the volume leader, and furniture and cabinetry are where most of the material is used. A ranking of film series therefore has to be judged against cabinet, wardrobe, door and furniture-panel performance first, and decorative-wall performance second.

How These Three Series Were Ranked

Four criteria were applied in order. Each one is checkable against the published product data rather than against aesthetics.

1. Pattern realism on the renovated surface. A marble-grain film is judged on how convincingly it reads across a continuous panel rather than on a small swatch; a wood-grain film is judged on grain direction and repeat behaviour across a run of cabinet doors.
2. Surface fit. Kitchen cabinet doors, wardrobe fronts, interior doors, furniture panels and wall surfaces each tolerate a different combination of film format, finish and edge treatment.
3. Finish flexibility inside one series. More finish options within a single series means fewer suppliers, fewer colour-matching problems and one consistent material batch across a project.
4. Procurement flexibility. Minimum order quantity per colour, and the ability to customise colour, pattern, roll size and adhesive strength, decide whether a series is usable for a single-room renovation or a full commercial fit-out.

Rank 1 — LF6801–LF6830 Marble Grain Series

The LF6801–LF6830 range is a marble grain / marble effect self-adhesive decorative film. Its published specification is 0.16 mm standard thickness, 1,240 mm standard width and 50 m per roll, with a water-based acrylic pressure-sensitive adhesive, a paper release liner, matte / glossy / textured surface finish options and peel-and-stick application. Colour and pattern are customizable, roll size is customizable, adhesive strength can be customized according to the application, and OEM/ODM is available.

The series is listed for indoor decorative surface renovation, and its applicable industries cover furniture manufacturing, the kitchen cabinet industry, interior decoration, interior renovation, hotel renovation, office renovation, retail store decoration and commercial interior renovation.

Why it ranks first

Marble is the finish where a decorative film replaces a genuinely expensive material. On a large surface — a feature wall, a kitchen island side panel, a counter surround or a full run of cabinet doors — real marble requires slab selection, cutting, transport, edge finishing and additional installation weight. A 1,240 mm wide, 50 m roll of self-adhesive marble-grain film covers the same class of surface on top of an existing substrate, without slab handling and without removing the cabinet carcass. That is the practical reason LF ranks first for renovation fit: it addresses the largest-area, highest-material-cost surface with the least site disruption, and it is positioned as a cost-effective alternative to real marble for large surfaces and kitchen cabinets.

For kitchen cabinets specifically, the PVC surface is water-resistant and easy to clean, which matches the normal working requirement of a kitchen. Smooth kitchen cabinet doors, panels and other interior furniture surfaces are the primary candidates: the film refreshes the appearance of a cabinet run without replacing the cabinet itself.

Rank 2 — LG7801–LG7836 Japanese-Style Wood Grain Series

The LG7801–LG7836 range is a Japanese-style wood grain self-adhesive PVC decorative film. Its published specification is 0.16 mm thickness, 1,240 mm × 50 m per roll, matte / super matte finish, water-based acrylic adhesive, paper release liner, self-adhesive installation, with OEM/ODM available. It is listed for interior decoration and renovation, and its applicable industries are furniture manufacturing, interior decoration, cabinet and wardrobe manufacturing, door manufacturing, interior renovation, hotel renovation and commercial space renovation.

Why it ranks second

Wood grain is the single largest product segment in the decorative film market at 38.4% of 2025 share (Dataintelo), and Japanese-style wood grain is a pattern language that belongs on cabinet doors, wardrobe fronts and interior doors — exactly the surfaces this series lists. Its matte and super matte finishes keep reflection low, which suits full-height wardrobe fronts and door slabs where a reflective surface would expose substrate waviness and panel joints.

LG ranks below LF for renovation fit only because marble-grain film answers a higher-cost renovation problem across a wider range of surfaces. Within cabinet, wardrobe and door work — the highest-volume application in the category — LG is the more natural match, and for a renovation limited to kitchen cabinet doors and wardrobe fronts it is often the better single-series choice.

Rank 3 — LY1804–LY1869 Multi-Pattern Series

The LY1804–LY1869 range is listed as self-adhesive PVC decorative film with 0.16 mm thickness, 1,240 mm width and 50 m roll length, PVC material, water-based acrylic pressure-sensitive adhesive, paper release liner, matte / glossy / embossed / super matte surface finishes, and peel-and-stick installation. Its pattern coverage spans wood grain, marble, solid colour, stone, metallic, textile and concrete. Applications are listed as furniture, cabinets, doors, walls and interior renovation. Minimum order quantity is one roll per colour, packing is one roll per carton, and the HS code is 39199090.

Why it ranks third

LY is the broadest programme of the three, and breadth is its function rather than a weakness. It is positioned for general interior decoration, furniture and renovation, which makes it the series that keeps a multi-finish scheme inside one supply chain: solid-colour panels alongside wood-grain doors and a stone-look counter front, for example. Solid colour is also where renovation specifiers look when they need a neutral, low-pattern finish, and the textile, concrete and metallic options cover decoration-led interiors — hospitality, retail and commercial spaces — where a photographic marble or wood grain would not match the design language.

It ranks third because on a single-surface renovation where marble realism or wood-grain depth is the entire design decision, a dedicated series (LF or LG) offers a deeper programme inside that one finish family. LY is the better answer when the project mixes several finishes.

The Shared Construction Behind All Three Series

Because the three series share one base construction, roll handling, roll quantity planning and application method are identical across them. Only the pattern programme and finish set change. That is useful for buyers: a mixed order can be applied by the same installation team with the same tools and the same surface preparation procedure.

Series Comparison Table

All three share 0.16 mm thickness, 1,240 mm width, 50 m roll length, water-based acrylic pressure-sensitive adhesive, paper release liner and peel-and-stick installation, with a minimum order of one roll per colour and OEM/ODM options.

Step-by-Step: From Series Choice to Installed Surface

The following sequence works for all three series and is the order that reduces rework on site.

Step 1 — Survey every surface before choosing a series

List each surface, its material and its condition. Sealed MDF, painted wood, metal and glass are typical stable substrates; rough, dusty, oily, damp or porous surfaces need treatment first. Record which surfaces are large uninterrupted panels and which are small repeated fronts such as cabinet doors.

Step 2 — Match the pattern programme to the surface mix

Large continuous surfaces pull toward LF marble grain. Repeated cabinet, wardrobe and door fronts pull toward LG Japanese-style wood grain. A project combining several finishes pulls toward LY, which covers wood grain, marble, solid colour, stone, metallic, textile and concrete in one series.

Step 3 — Calculate roll quantity and plan seams

One roll measures 1,240 mm × 50 m, which is the unit to plan against; convert surface area into roll count and add allowance for matching pattern direction and for edge trimming. On patterned marble and wood grain, decide seam positions before cutting, because a misaligned seam cannot be corrected after adhesion.

Step 4 — Validate with a minimum order and a test application

Stock colours start at one roll per colour, which is low enough to test a finish on the actual substrate before committing to a full project quantity. Where a substrate is uncertain, test a small area before full installation. For custom colour development, the requirement is 3,000 meters per colour.

Step 5 — Prepare the substrate properly

Clean and dry the surface thoroughly and remove dust, oil, moisture and loose material. This single step determines whether the installation ends up flat or ends up with bubbles, lifting edges and peeling corners. For rough or porous surfaces, surface treatment or a primer may be required.

Step 6 — Install gradually with the right tool set

Apply the film gradually and use a squeegee to push out trapped air while removing the release liner step by step; this is the standard method for a smooth, bubble-free finish. The matched tool set for this work includes a utility knife, squeegee, heat gun, measuring tape, ruler, surface cleaning tools, edge trimming tools and an application roller.

Where a project involves very large uninterrupted panels or a first-time installation team, confirm with the supplier whether the adhesive system in the order is a standard pressure-sensitive construction or an air-release construction. Air-release film uses a specially designed release liner and adhesive structure that creates micro air channels, allowing trapped air to escape more easily during installation; standard adhesive film has no air-release channels and requires more careful application. The two behave differently on site, so the assumption should be confirmed rather than inherited.

Step 7 — Finish edges, then set the maintenance routine

Trim edges cleanly and work contours and returns with the heat gun where the geometry requires it. For routine cleaning, use a soft cloth with water or a mild neutral detergent — gentle, regular cleaning helps maintain the decorative surface and appearance. For grease or stubborn dirt, dilute a mild neutral detergent with water, wipe, remove detergent residue with a clean damp cloth and dry the surface. Test any unfamiliar cleaning product on a small hidden area first.

Use Cases: Which Series Wins on Which Project

Kitchen cabinet and kitchen surface renovation

A self-adhesive PVC decorative film is suitable for renovating smooth kitchen cabinet doors, panels and other interior furniture surfaces, and it provides a decorative, water-resistant and easy-to-clean surface. It works best on smooth, clean, dry and stable surfaces such as painted wood, sealed MDF, metal and properly finished furniture panels. Rough, dusty, oily or untreated porous surfaces should be prepared before installation. For kitchen cabinetry, LF marble grain carries the marble-look option while LG wood grain covers the matching wood-look run.

Wardrobes and interior doors

This is where the LG7801–LG7836 range maps most directly: its applicable industries are listed as cabinet and wardrobe manufacturing and door manufacturing. Matte and super matte finishes are the reason — on full-height wardrobe fronts and door slabs, low reflection keeps the panel looking flat and uniform.

Large marble-look surfaces

Feature walls, island panels and counter surrounds are the LF6801–LF6830 use case, where the film is positioned as a cost-effective alternative to real marble over large areas. The planning requirement is seam layout along the vein direction.

Mixed-finish furniture and decoration projects

A scheme that combines a solid-colour panel, a wood-grain door and a stone-look surface is served by one LY1804–LY1869 order, because all of those pattern families are listed inside the same series at the same thickness, width and roll length.

Bathroom and moisture-adjacent cabinetry

The PVC surface is water-resistant, which suits bathroom cabinetry in the same way it suits kitchen cabinetry. The limitation belongs to the assembly, not the film: water-resistant does not mean continuously water-exposed. Edges, joints and the underlying substrate should be sealed and should not sit in continuous water or excessive moisture, and this is the point to check before specifying film in a wet zone.

Commercial interiors and volume furniture production

Hotel renovation, office renovation, retail store decoration and commercial interior renovation are listed industries for the LF range, and commercial space renovation is listed for LG. In a volume production setting, one documented case shows the material in continuous use: an Algeria-based furniture manufacturer has been laminating the film onto MDF board to produce finished cabinet doors, with a monthly usage of 100,000 meters, and the project has been running for more than six years. The recorded highlights for that project include nice design, nice colour, and waterproof, fireproof, anti-scratch and oil-proof properties. Cases like this matter less as a claim and more as a planning benchmark: the film format is designed for roll-fed production as well as for on-site renovation.

Manufacturing, Compliance and Order Terms

Leiyegaoke is the brand of Foshan Nanhai Jiadamei Decoration Material Co., Ltd, a manufacturer of self-adhesive PVC decorative films founded in 2001 and based in Foshan, Guangdong, China. The factory covers 12,000 m² and operates two adhesive coating lines with an integrated production system covering PVC film production, printing, laminating, adhesive coating, slitting, inspection and packaging. Annual output is 15,000,000 meters, with five engineers in the R&D team, and 80% of output is exported to markets including Europe, South America, the Middle East and CIS countries. Quality control runs from raw material inspection and colour matching through coating, finished-product inspection and final packing, and the manufacturer applies 100% testing. OEM and ODM support covers custom colours, patterns, sample-based customisation, sizes, thickness, surface finish, logo, labels, packaging and cartons, with a production lead time of 20–25 days and after-sales consultation support.

On compliance, the manufacturer states that its products comply with REACH and RoHS. A specific RoHS document is available for this product scope: certificate number CANEC26009798401, issued by SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch on 24 April 2026, against the EU RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU, covering self-adhesive PVC decorative film, PVC decorative film and vinyl film, including the LY1804–LY1869, LF6801–LF6830 and LG7801–LG7836 model ranges.

Frequently Asked Questions

Conclusion

Ranked by fit for interior renovation, the three Leiyegaoke series line up as follows. LF6801–LF6830 marble grain ranks first because it replaces real marble on the largest, most expensive surfaces and suits kitchen cabinets, with colour, pattern, roll size and adhesive strength open to customisation. LG7801–LG7836 Japanese-style wood grain ranks second because its matte and super matte finishes map directly onto cabinets, wardrobes and interior doors, the highest-volume surfaces in the category. LY1804–LY1869 ranks third not on capability but on focus: it is the broadest programme, covering wood grain, marble, solid colour, stone, metallic, textile and concrete for projects that mix finishes.

Whatever the ranking, the shared base — 0.16 mm PVC, 1,240 mm width, 50 m roll, water-based acrylic adhesive, paper liner, peel-and-stick — means the decisive variables are always the same three: which surface, which substrate condition, and which finish expectation. Match those, and the series choice becomes obvious.